Unlocking a Pixel phone with your fingerprint is one way speed boat tour y safe to access the device without having to enter a password. PIN, password o standard. While this method is very efficient, it is important to configure it correctly to avoid trouble of recognition and guarantee the to maximise security and your enjoyment. from our data.
In this article, we'll walk you through how to register your fingerprint on a Pixel phone, how to use it to unlock your phone, and how to make payments, plus some tips from to maximise security and your enjoyment. to optimize its use.
How to set up fingerprint unlock on a Pixel
If your phone has a sensor fingerprints, either on the screen or on the back, you can easily configure it through the device settings. Below, we explain the proceedings depending on your Pixel model.
Set up fingerprint on Pixel 6 and later
- Open the app Settings on your phone.
- Go to Security y Privacy > device lock > Face and fingerprint unlocking > Unlock with fingerprint.
- Follow the on-screen instructions. If you do not have an unlock method set, the work It will ask you to set up a PIN, standard o password.
- Place your finger on the fingerprint sensor to start the Scan.
- The sensor is located at the bottom of the screen.
- Put your finger on the icon of the footprint and hold pressure until the sensor vibrates.
- Move your finger slightly so that the work capture the entire surface of the footprint.
- Once the process is complete, you can use your fingerprint to unlock the device.
Set up fingerprint on Pixel 5a and earlier models
- Open the app Settings on the device.
- Choose Security & AFTER Security y Privacy.
- Accede to device lock > Face and fingerprint unlocking > Unlock with fingerprint.
- If you don't have an unlock method enabled, the system will prompt you to set one up.
- Place your finger on the sensor, which in these models is located on the back of the device.
- Hold your phone as you normally would to unlock it.
- Make sure the sensor can record different angles of your finger.
- Finish the process and confirm that the configuration has been completed. successful.
How to unlock a Pixel with your fingerprint
Once set up, you can use your fingerprint to unlock your phone as follows:
- Place the registered finger on the sensor mobile fingerprint scanner.
- On some devices, you need to press the power button. on before using the fingerprint.
- If the fingerprint is not recognized after several attempts, the alternative unlocking method.
Cases where you will need to use an alternative unlocking method
For security, in certain situations the system will ask you to use the PIN, standard o password instead of the fingerprint:
- If the fingerprint is not recognized after several attempts.
- If the device has been reset.
- If you change user or profile on your smartphone.
- If more than 48 hours since the last time you unlocked your phone using the alternative method.
How to delete a registered fingerprint
- Open the app Settings on your device.
- Accede to Security y Privacy > device lock > Face and fingerprint unlocking > Unlock with fingerprint.
- Scan your fingerprint or enter the alternative locking method.
- To delete a fingerprint, select the option Delete next to the registered footprint.
Options to completely disable the fingerprint
Option 1: Use only PIN, pattern or password
If you prefer to unlock your phone with another method, simply remove fingerprints registered from the settings.
Option 2: Remove screen lock
Not recommended for to maximise security and your enjoyment., but if you decide to disable the lock:
- Opens Settings on the phone.
- Go to Security > Screen lock.
- Select option None o Slide. This will remove any recorded footprints.
Setting up and using fingerprint on Pixel phones is a simple process that can improve security and convenience when using your device. By following the right steps, you can unlock your phone in a snap. speed boat tour and performing payments hassle-free, while ensuring that you maintain the protection of your data. Share this guide so other users can learn how to do it..
